Isso Vista Pack for Motorola WA840GP I did this for some time back and was delaying writing this guide, I had a motorola wireless router WA840GP which wanted to install a linux distro called OpenWRT which is responsible for replacing the firmware that comes with the router manufacturer, being more customizable so when configuring the router at will. The problem then was that it was not proven in this router and ran the risk of damaging the machine, in the end everything turned out well and satisfactory.
first thing is to flash the router, ie we change the firmware OpenWRT Linux distro for wireless routers, in this case after testing various versions it worked very well with whiterussian 0.9
for download:
http: / / downloads.openwrt.org/whiterussian/0.9/whiterussian-0.9.tar.bz2 recommend doing this flash with the cable network's router directly connected to the PC and not wirelessly. If even that have with the factory firmware to the address you bring the default gateway from a web browser and drop:
http://192.168.40.1 In the web interface we request a username and password factory which is
user: admin
password: motorola
tab There is a firmware upgrade which allows us to upload the firmware *. bin format, after making this interface will not graphics for web, telnet enter only the first time and then always ssh.
first thing to do is enter telnet to place the password and password to close the port and only ssh to log into the router. From a console: telnet 192.168.1.1
change the root password by typing passwd
So
:
telnet 192.168.40.1 Trying 192.168.40.1 ...
Connected to 192.168.40.1. Escape character is'^]'. === IMPORTANT ============================ Use 'passwd' to your login password September
this will disable telnet and enable SSH ---------------------------------------- - BusyBox v1.00 (2007.01.30-11:42+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __
together * 1 oz Kahlua over ice, Then float the cream or
* 1/2oz cream milk on the top.
-----------------------------------------------
---- root @ OpenWrt: ~ # passwd Changing password for root Enter the new password (minimum of 5, maximum of 8 characters) Please use a combination of upper and lower case letters and numbers. Enter new password: Re-enter new password: Password changed . root @ OpenWrt: ~ # disabled telnet now remains to be insecure and income is the ssh root password to enter through ssh just type in console: ssh 192.168.40.1 login as: root
root@192.168.40.1 's
password:
BusyBox v1.00 (2007.01.30-11:42 +0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
hacer el flashing con el metodo Tftp, para ello cambiamos la variable
" boot_wait" con nvram, escribimos:
nvram set boot_wait=on Ahora tenemos la variable cambiada solo en memoria, para salvar los cambios debemos ejecutar: nvram commit
al ejecutar este comando escribes en la memoria interna que trae el router y estas memorias aguantan unos cuantos miles de escrituras aprox, lo cual no deberia aterrarnos pero es bueno tenerlo en cuenta a la hora de querer configurar todas las variables hacerlas con una sola salvada, es decir no guardar hasta que estemos completamente seguros de que hemos echo todos los cambios necesarios.
Para consultar more documentation on other variables and check out the following links:
http://wiki.openwrt.org/OpenWrtDocs/WhiteRussian/Configuration
http://wiki.openwrt.org/OpenWrtNVRAM
http: / / wiki.openwrt.org / OpenWrtDocs / Using http://wiki.openwrt.org/OpenWrtDocs/Installing/TFTP?action=show&redirect=OpenWrtViaTftp
Something that I was making problems bridge between the Wireless and Ethernet, to see this look at the following link:
http://wiki.openwrt.org/OpenWrtDocs/Hardware/Motorola/WE800G
In conclusion I had to do was put it in bridged mode AP when I went to flash it, and how to use AP routed normally.
To see all the variables enter: nvram show To change a variable: nvram
September VARIABLENAME
is very important to write the name of the variable, otherwise he will take this error as a new variable and the correct change. Make the mistake of changing one variable and present problems, since not run the commit, just restart the router and you will lose unsaved changes. Finally I leave the current configuration on the router that works with mac filter, to set the physical mac address list must enclose them in quotation marks "", so: nvram
September
wl0_maclist = "00:1 A: 73:5 D: E5: 16 00:19: E0: 8F: D8: 22 00:11:50: E2: CB: 91 00: 19: E0: 8C: 09: E6 00:19: E0: 8C: 1E: 2E 00:1 C: 26:02:76: F1 00:23:4 D: DE: C8: 19 " root @
OpenWrt: ~ # nvram show
lan_lease = 86400 lan_stp = 1
lan_dhcp = 0
lan_hwaddr = 00:0 C: E5: 54:8 C: E8
lan_dns = lan_ifnames = eth1
lan_hostname = WA840GP lan_proto = static
lan_ipaddr = 192.168.40.1
vlan1hwname = et0
vlan1ports = 4 5
lan_ifname = br0
lan_wins =
lan_hwnames =
root @ OpenWrt: ~ # NVRAM show
wifi_ifname = eth2
wl_radius_port = 1812
wl_wds2
wl_wds3 = = =
wl0_frameburst on
wl_maxassoc = 128
wl0_akm = open
wl_phytypes =
wl0_infra = 1
wl0_country_code = U.S.
wl_infra = 1
wl0_wme_sta_be = 1915 1023 3 0 0 off
wl_macmodeEnable = 0
wl_radius_ipaddr
wl0_ifname = = = eth1
wl0_wme_sta_bk 1915 1023 7 0 0 off
kernel_mods = wl et kmemory
wl_net_reauth = 36000
wl0_mrate=0
wl0_mode=ap
wlif=eth1
wl0_ap_isolate=0
wl_mrate=0
wl_akm=
wl0_gmode=1 wl0_wme_no_ack=off
wl_gmode=1
wl0_macEnable=0
wl_mac_index=0
wl_wme_sta_vi=7 15 2 6016 3008 off
wl0_ssid=ELDI
wl0_dtim=1
wl_wme_ap_be=15 63 3 0 0 off
wl_wme_sta_vo=3 7 2 3264 1504 off
wl_plcphdr=long
wl_macmode=allow
wlogpio4=0
wl_wme_ap_bk=15 1023 7 0 0 off
wl_phytype=g
wl0id=0x4320
wl0_key1=8103380
wl_key_input_method=0
wl_lazywds=0
wl0_key2=
wl0_key3=
wl0_key4=
wl_auth_mode=none
wl_wpa_psk=
wl0_wme_ap_vi=7 15 1 6016 3008 off
wl_mode=ap
wl0_closed=0
wl0_rate=0
wl0_plcphdr=long
wl_wpa_gtk_rekey=86400
wl_afterburner_override=-1
wl0_macmode=allow
wl0gpio1=0
wl0_radioids=BCM2050
wl0_wme_ap_vo=3 7 1 3264 1504 off
wl0gpio2=0
wl0_phytype=g
wl0gpio3=0
wl0_lazywds=0
wl0gpio4=0
wl0gpio5=0
wl0_key_input_method=0
wl0_afterburner=auto
wl_wds_timeout=1
wl0_antdiv=-1
wl_dtim=3
wl_ssid=ELDI
wl0_wpa_psk=
wl_passphrase=
wl_key1=
wl_key2=
wl_key3=
wl0_unit=0
wl_country_code=US
wl_key4=
wl_hwaddr=00:0C:E5:54:8C:E8
wl0_net_reauth=36000
wl0_wds=
wl_rate=0
wl0_auth=0
wl0_wme=off
wl0_radius_port=1812
wl0_macmodeEnable=0
wl0_radius_ipaddr=
wl0_key_strength=0
wl_country=
wl0_wme_sta_vi=7 15 2 6016 3008 off
wl_crypto=tkip
wl_rateset=default
wl0_wme_sta_vo=3 7 2 3264 1504 off
wl_macEnable=0
wl_radius_key=
wl0_maxassoc=128
wl_unit=0
wl0_phytypes=g
wl0_wep=disabled
wl0_frag=2346
wl0_country=Colombia
wl_wds=
wl0_rateset=all
wl_wme=off
wl_wme_ap_vi=7 15 1 6016 3008 off
wl0_afterburner_override=-1
wl0_mac=
wl_auth=0
wl_wme_ap_vo=3 7 1 3264 1504 off
wl_frameburst=on
wl0_passphrase=motorola
wl0_rts=2347
wl_ifname=
wl_wep=disabled
wl_gmode_protection=auto
wl0_wpa_gtk_rekey=86400
wl_frag=2346
wl_preauth=
wl0_key=1
wl_maclist=00:1A:73:5D:E5:16 00:19:E0:8F:D8:22 00:11:50:E2:CB:91 00:19:E0:8C:09:E6 00:19:E0:8C:1E:2E 00:1C:26:02:76:F1
wl_wme_sta_be=15 1023 3 0 0 off
wl_radioids=
wl_corerev=
wl0_radio=1
wl_channel=7
wl_wme_sta_bk=15 1023 7 0 0 off
wl0_bcn=100
wl_radio=1
wl_afterburner=auto
wl0_hwaddr=00:0C:E5:54:8C:E8
wl0_preauth=
wl0_gmode_protection=auto
wl0_maclist=00:1A:73:5D:E5:16 00:19:E0:8F:D8:22 00:11:50:E2:CB:91 00:19:E0:8C:09:E6 00:19:E0:8C:1E:2E 00:1C:26:02:76:F1
wl_rts=2347
wl_ap_isolate=0
wl_wme_no_ack = off
wl0_radius_key =
wl0_wme_ap_be = 15 63 3 0 0 off
wl0_corerev = 7
wl_key = 2
wl0_channel = 7
wl0_wds_timeout = 1
wl0_wme_ap_bk = 15 1023 7 0 0 off
wl_closed = 0 = none
wl0_auth_mode wl0_crypto = TKIP
wl_bcn = 100
wl_antdiv =- 1
root @ OpenWrt: ~ # NVRAM show wl0_akm=open wl0_infra=1 wl0_country_code=US wl0_wme_sta_be=15 1023 3 0 0 off wl0_ifname=eth1 wl0_wme_sta_bk=15 1023 7 0 0 off wl0_mrate=0 wl0_mode=ap wl0_ap_isolate=0 wl0_gmode=1 wl0_wme_no_ack=off wl0_macEnable=0 wl0_ssid=ELDI wl0_dtim=1 wl0id=0x4320 wl0_key1=8103380 wl0_key2= wl0_key3= wl0_key4= wl0_wme_ap_vi=7 15 1 6016 3008 off wl0_closed=0 wl0_rate=0 wl0_plcphdr=long wl0_macmode=allow wl0gpio1=0
wl0_radioids=BCM2050
wl0_wme_ap_vo=3 7 1 3264 1504 off
wl0gpio2=0
wl0_phytype=g
wl0gpio3=0
wl0_lazywds=0
wl0gpio4=0
wl0gpio5=0
wl0_key_input_method=0
wl0_afterburner=auto
wl0_antdiv=-1
wl0_wpa_psk=
wl0_unit=0
wl0_net_reauth=36000
wl0_wds=
wl0_auth=0
wl0_wme=off
wl0_radius_port=1812
wl0_macmodeEnable=0
wl0_radius_ipaddr=
wl0_key_strength=0
wl0_wme_sta_vi=7 15 2 6016 3008 off
wl0_wme_sta_vo=3 7 2 3264 1504 off
wl0_maxassoc=128
wl0_phytypes=g
wl0_wep=disabled
wl0_frag=2346
wl0_country=Colombia
wl0_rateset=all
wl0_afterburner_override=-1
wl0_mac=
wl0_passphrase=motorola
wl0_rts=2347
wl0_wpa_gtk_rekey=86400
wl0_key=1
wl0_radio=1
wl0_bcn=100
wl0_hwaddr=00:0C:E5:54:8C:E8
wl0_preauth=
wl0_gmode_protection=auto
wl0_maclist=00:1A:73:5D:E5:16 00:19:E0:8F:D8:22 00:11:50:E2:CB:91 00:19:E0:8C:09:E6 00:19:E0:8C:1E:2E 00:1C:26:02:76:F1
wl0_radius_key=
wl0_wme_ap_be = 15 63 3 0 0 off
wl0_corerev = 7 = 7 wl0_channel
wl0_wds_timeout = 1
wl0_wme_ap_bk = 15 1023 7 0 0 off
wl0_auth_mode = none
wl0_crypto = TKIP
